KIT INCLUDES ALL CORRECT FITTING PARTS
Designed to be used in two- or three-way systems, the GS60 includes a non-resonant injection-molded ABS plastic and fiberglass vented basket. The 1" copper voice coil wound on a Kapton® former provides high power handling. A parabolic propylene cone ensures long-term reliability and provides the right compromise between compliance and stiffness for flatter high frequency response. The ferrite motor includes a neodymium bucking magnet atop the pole piece for increased motor strength and sensitivity. Terminals are secured by a small PC board integrated into the inside of the basket.
The GS60 is optimized for use in passive systems with the GS10 tweeter and the GS610C passive crossover. It can also be used in active systems or in a three-way system with the GS10 and GS40. For a combination of active and passive three-way system, use the GS60 with the GS10, GS40 and GS410C.
Specifications:
- Nominal Impedance: 4Ω
- RMS Power Handling: 70 W (with recommended crossover)
- Peak Power Handling: 200 W (with recommended crossover)
- Frequency Response (-3 dB): 50 Hz – 7 kHz
- Sensitivity (2.83 V/1 M): 89 dB
- Recommended Amplifier RMS Power Range: 15 W – 75 W
- Recommended Low Pass Filter Frequency and Slope: ≤ 3.5 kHz, ≥ 12 dB/oct
Dimensions:
Thiele & Small Parameters:
- Revc: 2.28 Ω
- Levc@1kHz: 0.14 mH
- Sd: 138.93 cm²
- Mmd: 11.8 g
- Mms: 12.75 g
- Cms: 306.5 µM/N
- Vas: 8.45 liters
- Fs: 80.5 Hz
- BL: 4.4 TM
- Qms: 6.33
- Qes: 0.76
- Qts: 0.67
- Xmax (1-way linear): 4 mm (3/16")
- Basket Displacement: 0.33 liters (0.011ft³)
Optimized for use with GS Series midrange speakers and crossovers in active or passive systems, the GS10 includes many of the same features as the top of the line GB10. The GS10 includes a 1″ fabric dome for silky-smooth high frequencies without the high frequency ringing common to metal and plastic domes. It includes a 1″ voice coil wound on an aluminum former and immersed in a ferrofluid-filled gap for high power handling. Distortion is reduced and high frequency response extended with an inductance reducing copper pole piece cap. An additional bucking magnet above the copper cap increases sensitivity and a small closed cell foam pad above the bucking magnet eliminates reflections between the back of the dome and the motor to smooth the frequency response.
Like the GB10, the GS10 includes an installation kit that can be used by DIYers and professionals alike to create the perfect custom or OEM-look installation.
Specifications:
- Nominal Impedance: 4 Ω
- RMS Power Handling: 70 W (with recommended crossover)
- Peak Power Handling: 200 W (with recommended crossover)
- Frequency Response: 1.8 kHz – 20 kHz
- Sensitivity (2.83V / 1M): 92 dB
- Recommended Amplifier RMS Power Range: 15 W – 75 W
- Recommended High Pass Filter Frequency and Slope: ≥ 3.5 kHz, ≥ 12 dB/oct
Dimensions:
Frequency Response Graph:
